News Center
Operating procedures and maintenance of lithium angle grinder
Release time:
2022-11-21
As a person engaged in daily work, Sander is indispensable as industry and daily. One is cutting and the other is grinding, but safety must be paid attention to in use, so let's learn about the operating procedures and maintenance of the lithium angle grinder!
As a person engaged in daily work, Sander is indispensable as industry and daily. One is cutting and the other is grinding, but safety must be paid attention to in use, so let's learn about the operating procedures and maintenance of the lithium angle grinder!
lithium angle grinder operating procedures:
The lithium angle grinder is a grinding wheel for cutting and grinding. There are many lightweight grinding machines, suitable for deburring and grinding.
lithium angle grinder use provisions:
1. With protective eye mask.
2. After turning on the switch, wait for 3~5 minutes to observe the stable rotation of the grinding wheel before working.
3. Employees with long hair must tie up their hair.
4, the direction of the cutter can not face the person.
After 30 minutes of continuous work, it must be stopped for 15 minutes.
6, can not hold the small parts processing grinder by hand.
7. After the work is over, clean the working environment by yourself.
Lithium angle grinder specific brands and models of grinding machine are different, please be sure to confirm the instructions before operation.
maintenance of lithium angle grinder:
The lithium angle grinder is a commonly used electric tool in our daily life, but the maintenance of the grinder is usually ignored, reminding everyone that maintenance is also required during use.
1. Always check whether the power cord is firmly connected, whether the plug is loose, and whether the switch action is flexible and reliable.
2. Check whether the brush is excessively worn. The brushes must be replaced immediately to avoid sparks or armature burnout due to poor brush contact.
3. Be careful not to block the tool entry and outlet, and remove oil and dust from any part of the tool.
4. Grease should be added in time.
5. In case of tool failure, send it to the manufacturer or designated repair station for inspection. When the tool is damaged due to improper use or human error, the manufacturer generally does not repair or replace it free of charge.
6. Check the corner mark. The square sand that cannot be used has no mark, and the mark is not clear, cannot be verified, and has no defects.
7, check the shortcomings of the grinding angle. There are two ways to check this. Visual inspection, directly observe whether there are cracks on the surface of the grinding angle; knock on the door, which is the main grinding angle process of inspection, the method is to knock the angle with a mallet. If there is no problem with brushing your teeth, it should be a crisp sound, and other sounds indicate a problem.
8. Check the rotary strength of the angle grinder. Extract angle mills of the same batch type according to the rotation intensity. Do not install and use angle mills without inspection.
Lithium-electric angle grinder uses high-speed rotation to contact with materials for grinding, cutting, rust removal, grinding, shaping, etc. The lithium angle grinder is very fast and is not suitable for cutting for safety reasons. It can also be seen from its name that it is used for flexible sanding from all angles. Of course, in actual use, the family also needs a tool for carpenters, metalworkers, and welders. I suggest you buy cheap and terrible things in the online store. The choice of lithium angle grinder, if only used for grinding machine, cheap enough.
Related News
2023-05-11
The use of lithium storm machine pay attention to matters?
2023-05-11
The basic overview of lithium battery storm machine?
2023-05-11
What are the advantages of lithium storm machine?
2023-05-11
The advantages and disadvantages of lithium electric hair dryer
MAobile Version
Copyright©2023 Nantong Kemao Lithium Technology Co., Ltd. | Business License | Powered by www.300.cn | SEO丨City Substation